Note: Bearings with adapter sleeves and seats, even if subjected to shock load or vibration load, there is no need to worry that the shaft and inner ring will loosen. However, with a tightening sleeveSeat bearings can not be used in the occasion of bearing large axial load. The preparation work of p

Note: Products with eccentric sleeves are not recommended for applications where the direction of rotation changes, because changes in the direction of rotation can cause loosening of the eccentric sleeve. The preparation work for products with eccentric sleeves is the same as that for products with

1. Check the accuracy of the shaftBefore installing the bearing, first check whether the dimensional tolerance of the shaft is qualified, whether the shaft is bent, bruised, burred, etc., and add some lubricating oil to the shaft.2. Check the rigidity and flatness of the mounting surfaceThe rigidity

The preparation work, the method of installing the bearing on the shaft, and the installation of the bearing seat are the same as the standard product.1. Fill with greaseIn order to enhance the effect of dustproof and waterproof, the rubber sealing lip inside the terminal cover and the internal spac